Returns/sets the appearance of the object boundary. Possible values for this property are as follows.

• 0 – Flat
• 1 – 3D

Default value is 0 - Flat

Returns/sets the starting date of the FMS Raw Data control.

This string can be in one of the following forms.

• Absolute date, for example, 1/31/2019
• Relative date, for example, T (today), T-14 (14 days prior to today), or T+1 (one day following today)

Default value is T-7

Returns/sets the border style. Possible values for this property are as follows.

• 0 - None
• 1 - Fixed single border

Default value is 0 - None

Returns/sets the filter to be used when retrieving Nodes.  Wildcard values * (multiple character) and ? (single character) are supported. Wildcards can be used in any part of the string to specify that any character or set of characters is allowed in its place.

Example

A filter string of "*Test*" will retrieve all Nodes with the word "Test" somewhere in the string, such as "TestDevice" or "MyTestDevice" or "Device001Test".

Default value is * (multiple character wildcard)

Returns/sets the Node property that will be filtered by the string specified in the ChooserFilterString property. Possible values for this property are as follows.

• 0 – Name
• 1 – Description
• 2 – ID

Default value is 0 - Name

Returns/sets the group currently selected in the Node chooser’s Group combo box.

Returns/sets the Node category currently selected in the Node chooser’s Node category combo box. Possible values for this property are as follows.

• 1 – Device
• 8 – Gas Device
• 9 – Liquid Device

Default value is 1 - Device

Returns/sets whether or not the Node chooser’s Node category combo box is visible. Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets the primary sort column of the Node chooser’s Node list.

Possible values for this property are as follows.

• 0 - Type ascending
• 2 - Name ascending
• 3 - Description ascending
• 4 - Type descending
• 5 - Name descending
• 6 - Description descending

Default value is 2 - Name ascending

Returns/sets the Site.Service currently selected in the Node chooser’s FMS service combo box.

Returns/sets whether or not the Node chooser’s FMS service combo box is visible. Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets the XML specifying the custom FMS commands configured for the control.  Another way to configure this property is to use the control’s property page.

Returns/sets the XML specifying the columns that will be displayed in the FMS Raw Data control. 

Another way to configure this property is to use the control-specific property page in the CygNet FMS Control Properties dialog box. See CygNet FMS Raw Data Control for more information.

Returns/sets the format of the dates shown in the FMS Raw Data control. Possible values for this property are as follows.

• 0 – Device_Time
• 1 – Contract_Time
• 2 – Local_Time

Default value is 0 - Device_Time

Returns/sets the number of decimal places that will be shown in the values displayed by the FMS Raw Data control.

Acceptable values include 0 - 10 decimal places.

Default value is 7

Returns/sets the type of data that will be displayed in the FMS Raw Data control. Possible values for this property are as follows.

• 1 – AlarmEntry
• 11 – ConfigLogRaw
• 20 – EventEntry
• 25 – MeteringRaw
• 27 – GasQualityRaw
• 57 - BatchRaw
• 112 - TicketRaw

Default value is 1 - AlarmEntry

Returns/sets the ending date of the FMS Raw Data control. This string can either be in the form of an Absolute date, for example, 1/31/2019, or a Relative date, for example, T (today), T-14 (14 days prior to today), or T+1 (one day following today).

Default value is T

Returns/sets the font used by the FMS Raw Data control. Click … to access the Font dialog box to make font selections.

Default value is MS Shell Dlg.

Returns/sets the Point in Time date and time of the FMS Raw Device Data control. 

This string can be in one of the following forms.

• Absolute Date/Time (for example, 1/31/2019 7:10:14 AM)
• Relative Date/Time (for example, y-1 m-2 d=15 H=5 M=30 S=0)
• Relative Day, which is an offset from the current day T (for example, T-10)

Default value is T, date and time today.

See Using the Home Menu for more information about PIT mode.

Returns/sets the Session starting date for the time window displayed in the control.  This string can either be in the form of an Absolute date, for example, 1/31/2019, or a Relative date, for example, T (today), T-14 (14 days prior to today), or T+1 (one day following today).

Returns/sets the Session date/time format for the time window displayed in the control. Possible values for this property are as follows.

• 0 – Device_Time
• 1 – Contract_Time
• 2 – Local_Time

Returns/sets the Session ending date for the time window displayed in the control. This string can either be in the form of an Absolute date, for example, 1/31/2019, or a Relative date, for example, T (today), T-14 (14 days prior to today), or T+1 (one day following today).

Returns/sets the Session Node tag, which specifies the active Node in the FMS Configuration control.  This tag must be in the form SITE.SERVICE|ID (for example, TEST.FMS|2540).

Returns/sets whether or not the Chooser pane will be displayed in the control.

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets whether or not the Options pane will be displayed in the control.

Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes

Returns/sets whether or not units will be displayed in the FMS Raw Data control.Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 0 - No

Returns/sets the unit set used to determine the units of each FMS data item in the FMS Raw Data control.  Another way to configure this property is to use either the control’s property page or to use the Options page on the FMS Raw Data control.

Default value is the <Default> unit set

Returns/sets whether or not the PITDateTime property will be used. Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 0 - No

Returns/sets whether or not the SessionNodeTag property will specify the active Node in the FMS Raw Data control.  If this property is set to 0 - No, the FMS Raw Data control will present a Chooser page for selection of the active Node. Possible values for this property are as follows.

• 0 - No
• 1 - Yes

Default value is 1 - Yes